APRS Track Direct

My position About ☰

reset

9W2LOV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2LOV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732286473	0 Pkt	0 Pkt	0 Pkt	-56 dBm	0.08 V
1732271207	0 Pkt	0 Pkt	0 Pkt	-56 dBm	0.1 V
1732266945	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.08 V
1732266591	0 Pkt	0 Pkt	0 Pkt	-72 dBm	0.08 V
1732266236	0 Pkt	0 Pkt	0 Pkt	-53 dBm	0.1 V
1732265881	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.08 V
1732265527	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.1 V
1732265172	0 Pkt	0 Pkt	0 Pkt	-53 dBm	0.1 V
1732264815	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.1 V
1732264460	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.1 V
1732263752	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.1 V
1732263397	0 Pkt	0 Pkt	0 Pkt	-56 dBm	0.1 V
1732263040	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.08 V
1732262686	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.08 V
1732262330	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.1 V
1732261975	0 Pkt	0 Pkt	0 Pkt	-53 dBm	0.08 V
1732261621	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.08 V
1732261264	0 Pkt	0 Pkt	0 Pkt	-54 dBm	0.08 V
1732260910	0 Pkt	0 Pkt	0 Pkt	-53 dBm	0.1 V
1732260200	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.08 V
1732259846	-	-	-	-	-
1732259844	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1732259491	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1732259135	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.12 V
1732258781	0 Pkt	0 Pkt	0 Pkt	-55 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)