This is the latest recevied telemetry packets stored in our database for station/object SP2GKG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779805713 | 3.41 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779804812 | 3.42 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779803912 | 3.43 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779803011 | 3.45 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779802110 | 3.47 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779801210 | 3.9 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800468 | 3.9 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800362 | 3.89 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800350 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800337 | 3.92 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800319 | 3.89 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800198 | 3.89 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800183 | 3.87 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800165 | 3.87 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800138 | 3.86 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800125 | 3.85 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800078 | 3.85 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779800066 | 3.88 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779765794 | 3.4 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779764894 | 3.42 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779763993 | 3.92 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779763979 | 3.92 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779763966 | 3.94 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779763944 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1779763931 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)