APRS Track Direct

My position About ☰

reset

XE2KK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1790654915	0.68 Load	58 DegC	40 Mb	475 Pkt	2590 Pkt
1790654015	0.47 Load	58 DegC	37 Mb	605 Pkt	2625 Pkt
1790653115	0.58 Load	57.46 DegC	36 Mb	495 Pkt	2584 Pkt
1790652215	0.62 Load	58 DegC	38 Mb	592 Pkt	2601 Pkt
1790651316	0.44 Load	57.46 DegC	38 Mb	589 Pkt	2611 Pkt
1790650415	0.87 Load	58 DegC	40 Mb	495 Pkt	2580 Pkt
1790649516	0.45 Load	58 DegC	34 Mb	520 Pkt	2585 Pkt
1790648615	0.64 Load	58 DegC	38 Mb	589 Pkt	2605 Pkt
1790647715	0.51 Load	59.07 DegC	39 Mb	599 Pkt	2602 Pkt
1790646815	0.39 Load	59.61 DegC	39 Mb	532 Pkt	2598 Pkt
1790645915	0.48 Load	59.61 DegC	38 Mb	614 Pkt	2623 Pkt
1790645015	0.42 Load	59.61 DegC	31 Mb	523 Pkt	2590 Pkt
1790644115	0.43 Load	60.15 DegC	37 Mb	537 Pkt	2574 Pkt
1790643215	0.44 Load	60.15 DegC	39 Mb	542 Pkt	2597 Pkt
1790642315	0.28 Load	59.61 DegC	43 Mb	435 Pkt	2547 Pkt
1790641415	0.32 Load	59.07 DegC	113 Mb	444 Pkt	2562 Pkt
1790640515	0.41 Load	60.69 DegC	36 Mb	502 Pkt	2561 Pkt
1790639615	0.43 Load	60.15 DegC	40 Mb	516 Pkt	2586 Pkt
1790638715	0.39 Load	60.15 DegC	40 Mb	499 Pkt	2554 Pkt
1790637815	0.34 Load	60.69 DegC	40 Mb	528 Pkt	2587 Pkt
1790636915	0.41 Load	60.15 DegC	46 Mb	461 Pkt	2549 Pkt
1790636015	0.68 Load	60.15 DegC	46 Mb	570 Pkt	2581 Pkt
1790635115	0.35 Load	60.15 DegC	50 Mb	600 Pkt	2641 Pkt
1790634215	0.43 Load	60.15 DegC	48 Mb	515 Pkt	2620 Pkt
1790633315	0.45 Load	60.15 DegC	40 Mb	592 Pkt	2645 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)