This is the latest recevied telemetry packets stored in our database for station/object 9W2TWC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762218655 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1762218640 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1762218617 | 4.79 VDC | 0 | 0 | 0 | 0 |
| 1762218574 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1762218396 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1762218387 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1762218365 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1762218350 | 3.33 VDC | 0 | 0 | 0 | 0 |
| 1762218333 | 3.83 VDC | 0 | 0 | 0 | 0 |
| 1762218284 | 3.99 VDC | 0 | 0 | 0 | 0 |
| 1762218269 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1762218247 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1762218232 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1762218217 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1762218203 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1762218143 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1762218128 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1762218109 | 4.36 VDC | 0 | 0 | 0 | 0 |
| 1762218069 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1762218053 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1762218038 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1762218017 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1762218001 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1762217963 | 4.91 VDC | 0 | 0 | 0 | 0 |
| 1762217933 | 3.57 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)