APRS Track Direct

My position About ☰

reset

9W2FHG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2FHG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1836274655	24 Pkt	0 Pkt	-73 dBm	5.02 V
1779758704	54 Pkt	8 Pkt	-70 dBm	5.02 V
1779756875	59 Pkt	5 Pkt	-70 dBm	5.02 V
1779755052	54 Pkt	0 Pkt	-70 dBm	5.02 V
1779753223	3 Pkt	0 Pkt	-72 dBm	5 V
1779751975	8 Pkt	1 Pkt	-70 dBm	5.02 V
1779750151	13 Pkt	2 Pkt	-72 dBm	5 V
1779748327	7 Pkt	2 Pkt	-71 dBm	5.02 V
1779746506	0 Pkt	0 Pkt	-70 dBm	5.02 V
1779744630	10 Pkt	0 Pkt	-71 dBm	5.02 V
1779742806	13 Pkt	3 Pkt	-71 dBm	5.02 V
1779740983	7 Pkt	2 Pkt	-71 dBm	5.02 V
1779739159	11 Pkt	0 Pkt	-72 dBm	5.02 V
1779737336	9 Pkt	0 Pkt	-72 dBm	5.02 V
1779735513	14 Pkt	1 Pkt	-71 dBm	5.02 V
1779733688	7 Pkt	0 Pkt	-70 dBm	5.02 V
1779731863	11 Pkt	3 Pkt	-71 dBm	5.02 V
1779730039	19 Pkt	3 Pkt	-72 dBm	5.02 V
1779728215	12 Pkt	7 Pkt	-71 dBm	5.02 V
1779726391	79 Pkt	2 Pkt	-71 dBm	5.02 V
1779724563	1 Pkt	0 Pkt	-70 dBm	5.02 V
1779723402	57 Pkt	0 Pkt	-72 dBm	5.02 V
1779719046	67 Pkt	0 Pkt	-73 dBm	5.02 V
1779716967	63 Pkt	10 Pkt	-73 dBm	5.02 V
1779713014	33 Pkt	1 Pkt	-73 dBm	5.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)