This is the latest recevied telemetry packets stored in our database for station/object TA2IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1754481930 | 129 Pkt | 37 Pkt | 6 Pkt | -61 dBm | 0.08 V |
1754481005 | 118 Pkt | 40 Pkt | 4 Pkt | -59 dBm | 0.08 V |
1754480078 | 121 Pkt | 28 Pkt | 2 Pkt | -59 dBm | 0.08 V |
1754479157 | 125 Pkt | 17 Pkt | 9 Pkt | -61 dBm | 0.08 V |
1754478235 | 148 Pkt | 5 Pkt | 6 Pkt | -59 dBm | 0.08 V |
1754477307 | 149 Pkt | 2 Pkt | 26 Pkt | -60 dBm | 0.08 V |
1754476379 | 139 Pkt | 1 Pkt | 20 Pkt | -61 dBm | 0.08 V |
1754475452 | 128 Pkt | 2 Pkt | 13 Pkt | -59 dBm | 0.08 V |
1754474526 | 13 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0.08 V |
1754474113 | 113 Pkt | 13 Pkt | 11 Pkt | -59 dBm | 0.08 V |
1754473186 | 8 Pkt | 0 Pkt | 2 Pkt | -60 dBm | 0.08 V |
1754472944 | 125 Pkt | 25 Pkt | 7 Pkt | -59 dBm | 0.08 V |
1754472018 | 112 Pkt | 22 Pkt | 16 Pkt | -59 dBm | 0.08 V |
1754471095 | 111 Pkt | 17 Pkt | 13 Pkt | -60 dBm | 0.08 V |
1754470173 | 97 Pkt | 18 Pkt | 9 Pkt | -59 dBm | 0.08 V |
1754469252 | 106 Pkt | 14 Pkt | 12 Pkt | -60 dBm | 0.08 V |
1754468326 | 102 Pkt | 16 Pkt | 9 Pkt | -60 dBm | 0.08 V |
1754467402 | 147 Pkt | 13 Pkt | 3 Pkt | -62 dBm | 0.08 V |
1754466476 | 124 Pkt | 13 Pkt | 9 Pkt | -59 dBm | 0.08 V |
1754465551 | 14 Pkt | 0 Pkt | 2 Pkt | -62 dBm | 0.08 V |
1754464544 | 129 Pkt | 5 Pkt | 4 Pkt | -60 dBm | 0.08 V |
1754463618 | 11 Pkt | 0 Pkt | 2 Pkt | -60 dBm | 0.08 V |
1754463170 | 117 Pkt | 13 Pkt | 7 Pkt | -60 dBm | 0.08 V |
1754462245 | 110 Pkt | 10 Pkt | 15 Pkt | -59 dBm | 0.08 V |
1754461324 | 12 Pkt | 0 Pkt | 2 Pkt | -59 dBm | 0.08 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)