This is the latest recevied telemetry packets stored in our database for station/object TA1KNN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719428220 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719427291 | 0 Pkt | 1 Pkt | 0 Pkt | -71 dBm | 0 V |
1719426357 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719425440 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719424495 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719423571 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719422633 | 0 Pkt | 1 Pkt | 0 Pkt | -71 dBm | 0 V |
1719421709 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719420771 | 0 Pkt | 1 Pkt | 0 Pkt | -71 dBm | 0 V |
1719419840 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719418909 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
1719417980 | 0 Pkt | 1 Pkt | 0 Pkt | -72 dBm | 0 V |
1719417047 | 0 Pkt | 1 Pkt | 0 Pkt | -71 dBm | 0 V |
1719411862 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719410929 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719409998 | 0 Pkt | 1 Pkt | 0 Pkt | -74 dBm | 0 V |
1719409104 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719408213 | 0 Pkt | 1 Pkt | 0 Pkt | -73 dBm | 0 V |
1719407205 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 0 V |
1719406276 | 0 Pkt | 1 Pkt | 0 Pkt | -76 dBm | 0 V |
1719405343 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
1719404412 | 0 Pkt | 1 Pkt | 0 Pkt | -72 dBm | 0 V |
1719403481 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
1719402550 | 0 Pkt | 1 Pkt | 0 Pkt | -72 dBm | 0 V |
1719401620 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)