This is the latest recevied telemetry packets stored in our database for station/object DK3RW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790653692 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1790653586 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1790653490 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1790653474 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1790653458 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1790653424 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1790653381 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1790653128 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1790625930 | 2.95 VDC | 0 | 0 | 0 | 0 |
| 1790625026 | 3 VDC | 0 | 0 | 0 | 0 |
| 1790624122 | 3.04 VDC | 0 | 0 | 0 | 0 |
| 1790623218 | 3.07 VDC | 0 | 0 | 0 | 0 |
| 1790622314 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1790621410 | 3.12 VDC | 0 | 0 | 0 | 0 |
| 1790620506 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1790619602 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1790618698 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1790617794 | 3.26 VDC | 0 | 0 | 0 | 0 |
| 1790616890 | 3.31 VDC | 0 | 0 | 0 | 0 |
| 1790615986 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1790614178 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1790613273 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1790612369 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1790611465 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1790610561 | 3.61 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)