APRS Track Direct

My position About ☰

reset

W9MCP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9MCP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1753545995	12.3 Volt	260 Pkt	20 Pkt	95 Pcnt	19.5 C
1753545696	12.3 Volt	260 Pkt	20 Pkt	95 Pcnt	19.5 C
1753545695	12.3 Volt	260 Pkt	20 Pkt	95 Pcnt	19.5 C
1753545395	12.3 Volt	260 Pkt	20 Pkt	94 Pcnt	19.5 C
1753545096	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	20 C
1753545095	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	20 C
1753544795	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	19.5 C
1753544498	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	19.5 C
1753544495	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	19.5 C
1753544195	12.3 Volt	260 Pkt	30 Pkt	94 Pcnt	20 C
1753543896	12.3 Volt	270 Pkt	30 Pkt	94 Pcnt	20 C
1753543895	12.3 Volt	270 Pkt	30 Pkt	94 Pcnt	20 C
1753543595	12.3 Volt	270 Pkt	30 Pkt	93 Pcnt	19.5 C
1753543296	12.3 Volt	280 Pkt	30 Pkt	94 Pcnt	19.5 C
1753543295	12.3 Volt	280 Pkt	30 Pkt	94 Pcnt	19.5 C
1753542995	12.3 Volt	280 Pkt	30 Pkt	93 Pcnt	20 C
1753542696	12.3 Volt	290 Pkt	30 Pkt	94 Pcnt	20 C
1753542695	12.3 Volt	290 Pkt	30 Pkt	94 Pcnt	20 C
1753542395	12.3 Volt	290 Pkt	30 Pkt	94 Pcnt	20 C
1753542096	12.3 Volt	300 Pkt	30 Pkt	94 Pcnt	19.5 C
1753542095	12.3 Volt	300 Pkt	30 Pkt	94 Pcnt	19.5 C
1753541796	12.3 Volt	300 Pkt	20 Pkt	95 Pcnt	20 C
1753541496	12.3 Volt	300 Pkt	20 Pkt	95 Pcnt	20 C
1753541495	12.3 Volt	300 Pkt	20 Pkt	95 Pcnt	20 C
1753541195	12.3 Volt	310 Pkt	20 Pkt	95 Pcnt	20 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)