APRS Track Direct

My position About ☰

reset

EA8EE-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*	SAT*
1790647020	37.08 °C	35.9 %RH	828 hPa	4.22 V	8
1790646992	37.04 °C	35.1 %RH	828 hPa	4.21 V	8
1790646956	37.02 °C	35.4 %RH	828 hPa	4.21 V	9
1790646933	37.02 °C	36.1 %RH	828 hPa	4.21 V	7
1790646915	37.02 °C	35 %RH	828 hPa	4.21 V	9
1790646901	37.02 °C	35.8 %RH	828 hPa	4.21 V	7
1790646867	37 °C	35.5 %RH	828 hPa	4.21 V	6
1790646835	37 °C	36.1 %RH	828 hPa	4.21 V	6
1790646826	37 °C	35.2 %RH	828 hPa	4.21 V	6
1790646795	37 °C	35.7 %RH	828 hPa	4.21 V	6
1790646779	37 °C	35.1 %RH	828 hPa	4.21 V	6
1790646760	37.02 °C	34.7 %RH	828 hPa	4.21 V	5
1790646696	37.04 °C	35.4 %RH	828 hPa	4.21 V	6
1790646638	37.08 °C	34.8 %RH	828 hPa	4.21 V	6
1790646620	37.09 °C	35.7 %RH	828 hPa	4.21 V	5
1790646580	37.11 °C	35.5 %RH	828 hPa	4.21 V	0
1790646479	37.16 °C	35.1 %RH	828 hPa	4.21 V	4
1790646308	37.25 °C	35.5 %RH	828 hPa	4.21 V	6
1790646274	37.27 °C	35.1 %RH	828 hPa	4.21 V	6
1790645967	37.22 °C	35.2 %RH	828 hPa	4.22 V	6
1790645949	37.2 °C	34.8 %RH	828 hPa	4.21 V	6
1790645926	37.18 °C	35.2 %RH	828 hPa	4.22 V	6
1790645912	37.18 °C	35.2 %RH	828 hPa	4.21 V	6
1790645902	37.18 °C	35.2 %RH	828 hPa	4.21 V	6
1790645889	37.16 °C	35.3 %RH	828 hPa	4.21 V	6

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 0

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)