This is the latest recevied telemetry packets stored in our database for station/object YO2KCB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | EffTo* |
---|---|---|---|---|---|
1758214454 | 12.56 Volt | 100 Pkt | 50 Pkt | 100 Pcnt | 87 Pcnt |
1758212652 | 12.48 Volt | 90 Pkt | 50 Pkt | 100 Pcnt | 87 Pcnt |
1758210850 | 12.48 Volt | 90 Pkt | 50 Pkt | 100 Pcnt | 87 Pcnt |
1758209049 | 12.48 Volt | 90 Pkt | 50 Pkt | 100 Pcnt | 87 Pcnt |
1758207247 | 12.48 Volt | 100 Pkt | 50 Pkt | 100 Pcnt | 86 Pcnt |
1758205445 | 12.48 Volt | 100 Pkt | 50 Pkt | 99 Pcnt | 86 Pcnt |
1758203644 | 12.48 Volt | 100 Pkt | 50 Pkt | 100 Pcnt | 86 Pcnt |
1758201842 | 12.48 Volt | 130 Pkt | 60 Pkt | 98 Pcnt | 86 Pcnt |
1758200040 | 12.48 Volt | 140 Pkt | 70 Pkt | 98 Pcnt | 85 Pcnt |
1758198238 | 12.48 Volt | 120 Pkt | 50 Pkt | 99 Pcnt | 85 Pcnt |
1758196437 | 12.48 Volt | 120 Pkt | 50 Pkt | 99 Pcnt | 85 Pcnt |
1758194635 | 12.48 Volt | 120 Pkt | 50 Pkt | 100 Pcnt | 84 Pcnt |
1758192833 | 12.48 Volt | 110 Pkt | 50 Pkt | 100 Pcnt | 84 Pcnt |
1758191032 | 12.56 Volt | 120 Pkt | 50 Pkt | 100 Pcnt | 84 Pcnt |
1758189230 | 12.48 Volt | 140 Pkt | 60 Pkt | 100 Pcnt | 83 Pcnt |
1758187428 | 12.48 Volt | 140 Pkt | 60 Pkt | 100 Pcnt | 83 Pcnt |
1758185627 | 12.48 Volt | 120 Pkt | 50 Pkt | 96 Pcnt | 82 Pcnt |
1758183825 | 12.56 Volt | 140 Pkt | 40 Pkt | 88 Pcnt | 82 Pcnt |
1758182023 | 12.48 Volt | 180 Pkt | 50 Pkt | 84 Pcnt | 81 Pcnt |
1758180221 | 12.48 Volt | 210 Pkt | 60 Pkt | 82 Pcnt | 81 Pcnt |
1758178420 | 12.48 Volt | 200 Pkt | 60 Pkt | 84 Pcnt | 81 Pcnt |
1758176618 | 12.56 Volt | 160 Pkt | 40 Pkt | 92 Pcnt | 81 Pcnt |
1758174816 | 12.56 Volt | 160 Pkt | 40 Pkt | 93 Pcnt | 80 Pcnt |
1758173015 | 12.48 Volt | 190 Pkt | 50 Pkt | 92 Pcnt | 79 Pcnt |
1758171213 | 12.56 Volt | 180 Pkt | 40 Pkt | 90 Pcnt | 79 Pcnt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
EffTo: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)