APRS Track Direct

My position About ☰

reset

TA0TC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA0TC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1786662844	14 Pkt	3 Pkt	31 dBm	15.44 V
1786662098	14 Pkt	2 Pkt	31 dBm	16.24 V
1786661350	13 Pkt	2 Pkt	31 dBm	15.42 V
1786660605	10 Pkt	5 Pkt	31 dBm	15.42 V
1786659859	16 Pkt	2 Pkt	31 dBm	15.34 V
1786659113	14 Pkt	6 Pkt	31 dBm	15.46 V
1786658367	14 Pkt	3 Pkt	31 dBm	15.38 V
1786657622	15 Pkt	1 Pkt	31 dBm	15.87 V
1786656877	16 Pkt	0 Pkt	31 dBm	15.42 V
1786656130	14 Pkt	1 Pkt	31 dBm	15.38 V
1786655385	11 Pkt	0 Pkt	31 dBm	15.42 V
1786654641	9 Pkt	0 Pkt	31 dBm	15.52 V
1786653898	8 Pkt	0 Pkt	31 dBm	15.38 V
1786653154	27 Pkt	0 Pkt	31 dBm	15.4 V
1786652406	8 Pkt	1 Pkt	31 dBm	15.4 V
1786651662	17 Pkt	0 Pkt	31 dBm	15.44 V
1786650915	16 Pkt	1 Pkt	31 dBm	15.42 V
1786650169	14 Pkt	1 Pkt	31 dBm	15.4 V
1786649423	15 Pkt	1 Pkt	31 dBm	15.38 V
1786648679	11 Pkt	0 Pkt	31 dBm	15.2 V
1786647933	15 Pkt	0 Pkt	31 dBm	15.44 V
1786647187	11 Pkt	1 Pkt	31 dBm	15.5 V
1786646443	14 Pkt	1 Pkt	31 dBm	15.44 V
1786645699	12 Pkt	0 Pkt	31 dBm	17.66 V
1786644953	13 Pkt	1 Pkt	31 dBm	15.38 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)