APRS Track Direct

My position About ☰

reset

KC2MDN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC2MDN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758179790	14.4 Volt	970 Pkt	210 Pkt	65 Pcnt
1758179789	14.4 Volt	970 Pkt	210 Pkt	65 Pcnt
1758179489	14.4 Volt	980 Pkt	210 Pkt	65 Pcnt
1758179190	14.4 Volt	960 Pkt	200 Pkt	64 Pcnt
1758179189	14.4 Volt	960 Pkt	200 Pkt	64 Pcnt
1758178889	14.4 Volt	950 Pkt	200 Pkt	64 Pcnt
1758178590	14.4 Volt	930 Pkt	200 Pkt	64 Pcnt
1758178589	14.4 Volt	930 Pkt	200 Pkt	64 Pcnt
1758178448	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758178289	14.4 Volt	890 Pkt	200 Pkt	63 Pcnt
1758177990	14.4 Volt	900 Pkt	200 Pkt	63 Pcnt
1758177989	14.4 Volt	900 Pkt	200 Pkt	63 Pcnt
1758177689	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758177391	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758177389	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758177089	14.4 Volt	910 Pkt	190 Pkt	62 Pcnt
1758176790	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758176789	14.4 Volt	900 Pkt	200 Pkt	62 Pcnt
1758176531	14.4 Volt	890 Pkt	200 Pkt	64 Pcnt
1758176489	14.4 Volt	890 Pkt	200 Pkt	63 Pcnt
1758176190	14.33 Volt	920 Pkt	210 Pkt	64 Pcnt
1758176189	14.33 Volt	920 Pkt	210 Pkt	64 Pcnt
1758175889	14.4 Volt	910 Pkt	200 Pkt	64 Pcnt
1758175591	14.4 Volt	900 Pkt	200 Pkt	64 Pcnt
1758175589	14.4 Volt	900 Pkt	200 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)