This is the latest recevied telemetry packets stored in our database for station/object S59EHI-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcc* | Vbat* | Bhp* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792138220 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792137921 | 4.97 V | 4.12 V | 91 % | 0 | 0 |
| 1792137620 | 4.95 V | 4.13 V | 92 % | 0 | 0 |
| 1792137321 | 4.98 V | 4.13 V | 92 % | 0 | 0 |
| 1792137081 | 4.97 V | 4.13 V | 92 % | 0 | 0 |
| 1792136721 | 4.97 V | 4.12 V | 91 % | 0 | 0 |
| 1792136481 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792136120 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792135820 | 4.95 V | 4.12 V | 91 % | 0 | 0 |
| 1792135521 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792135280 | 4.95 V | 4.12 V | 91 % | 0 | 0 |
| 1792134920 | 4.95 V | 4.12 V | 91 % | 0 | 0 |
| 1792134681 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792134321 | 4.99 V | 4.12 V | 91 % | 0 | 0 |
| 1792134081 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792133721 | 4.93 V | 4.12 V | 91 % | 0 | 0 |
| 1792133480 | 4.96 V | 4.12 V | 91 % | 0 | 0 |
| 1792133121 | 4.97 V | 4.12 V | 91 % | 0 | 0 |
| 1792132881 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792132521 | 4.99 V | 4.12 V | 91 % | 0 | 0 |
| 1792132221 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792131921 | 4.98 V | 4.12 V | 91 % | 0 | 0 |
| 1792131681 | 4.97 V | 4.12 V | 91 % | 0 | 0 |
*Used Equation Coefficients:
Vcc: 0, 1, 0
Vbat: 0, 1, 0
Bhp: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)