APRS Track Direct

My position About ☰

reset

K1EQX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1EQX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750145602	14.1 Volt	1650 Pkt	330 Pkt	65 Pcnt
1750143798	14.1 Volt	1680 Pkt	360 Pkt	64 Pcnt
1750141995	14.1 Volt	1710 Pkt	400 Pkt	64 Pcnt
1750140193	14.1 Volt	1670 Pkt	380 Pkt	65 Pcnt
1750138391	14.03 Volt	1640 Pkt	360 Pkt	66 Pcnt
1750136590	14.1 Volt	1660 Pkt	330 Pkt	67 Pcnt
1750134789	14.1 Volt	1650 Pkt	320 Pkt	66 Pcnt
1750132987	13.95 Volt	1660 Pkt	340 Pkt	66 Pcnt
1750131185	14.1 Volt	1590 Pkt	380 Pkt	66 Pcnt
1750129386	14.1 Volt	1510 Pkt	390 Pkt	65 Pcnt
1750127581	14.03 Volt	1520 Pkt	380 Pkt	64 Pcnt
1750125780	14.1 Volt	1500 Pkt	360 Pkt	64 Pcnt
1750123978	14.1 Volt	1430 Pkt	330 Pkt	62 Pcnt
1750122176	14.1 Volt	1370 Pkt	340 Pkt	61 Pcnt
1750120375	14.1 Volt	1360 Pkt	370 Pkt	62 Pcnt
1750118572	14.1 Volt	1380 Pkt	430 Pkt	62 Pcnt
1750116774	14.1 Volt	1320 Pkt	400 Pkt	62 Pcnt
1750114969	14.03 Volt	1280 Pkt	380 Pkt	62 Pcnt
1750113167	14.1 Volt	1240 Pkt	400 Pkt	60 Pcnt
1750111366	13.95 Volt	1290 Pkt	410 Pkt	59 Pcnt
1750109564	14.1 Volt	1280 Pkt	420 Pkt	60 Pcnt
1750107764	14.1 Volt	1170 Pkt	380 Pkt	59 Pcnt
1750105960	14.1 Volt	1190 Pkt	380 Pkt	60 Pcnt
1750104159	14.1 Volt	1180 Pkt	380 Pkt	60 Pcnt
1750102359	14.1 Volt	1180 Pkt	390 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)