APRS Track Direct

My position About ☰

reset

HS2GJW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2GJW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1786719502	7 Pkt	0 Pkt	-72 dBm	14.52 V
1786718877	8 Pkt	1 Pkt	-75 dBm	14.48 V
1786718253	11 Pkt	0 Pkt	-72 dBm	14.48 V
1786717628	7 Pkt	0 Pkt	-73 dBm	14.52 V
1786717003	7 Pkt	0 Pkt	-74 dBm	14.48 V
1786716378	10 Pkt	0 Pkt	-73 dBm	14.42 V
1786715752	7 Pkt	0 Pkt	-73 dBm	14.52 V
1786715127	7 Pkt	1 Pkt	-76 dBm	14.52 V
1786714503	10 Pkt	2 Pkt	-75 dBm	14.48 V
1786713876	9 Pkt	0 Pkt	-75 dBm	14.52 V
1786713251	5 Pkt	1 Pkt	-74 dBm	14.48 V
1786712626	3 Pkt	0 Pkt	-75 dBm	14.48 V
1786712006	3 Pkt	0 Pkt	-76 dBm	14.48 V
1786711377	3 Pkt	1 Pkt	-74 dBm	14.52 V
1786710752	10 Pkt	3 Pkt	-74 dBm	14.48 V
1786710127	10 Pkt	0 Pkt	-77 dBm	14.48 V
1786709502	6 Pkt	0 Pkt	-75 dBm	14.52 V
1786708878	6 Pkt	1 Pkt	-78 dBm	14.52 V
1786708253	3 Pkt	0 Pkt	-76 dBm	14.52 V
1786707628	5 Pkt	0 Pkt	-75 dBm	14.48 V
1786707004	9 Pkt	0 Pkt	-78 dBm	14.52 V
1786706379	9 Pkt	0 Pkt	-76 dBm	14.52 V
1786705754	8 Pkt	0 Pkt	-76 dBm	14.52 V
1786705129	2 Pkt	0 Pkt	-74 dBm	14.52 V
1786704505	2 Pkt	0 Pkt	-75 dBm	14.48 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)