This is the latest recevied telemetry packets stored in our database for station/object W1WRA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749328448 | 53.56 | 0.15 | 73 | 0 | 0 |
| 1749327848 | 53.56 | 0.29 | 75 | 0 | 0 |
| 1749327248 | 54.04 | 0.2 | 73 | 0 | 0 |
| 1749326648 | 55.02 | 0.2 | 66 | 0 | 0 |
| 1749326048 | 55.99 | 0.21 | 68 | 0 | 0 |
| 1749325448 | 55.99 | 0.18 | 69 | 0 | 0 |
| 1749324848 | 55.99 | 0.23 | 71 | 0 | 0 |
| 1749324248 | 55.99 | 0.17 | 74 | 0 | 0 |
| 1749323648 | 57.45 | 0.32 | 73 | 0 | 0 |
| 1749323048 | 56.48 | 0.2 | 74 | 0 | 0 |
| 1749322448 | 55.5 | 0.18 | 78 | 0 | 0 |
| 1749321848 | 55.5 | 0.26 | 79 | 0 | 0 |
| 1749321248 | 53.56 | 0.34 | 76 | 0 | 0 |
| 1749320648 | 53.56 | 0.2 | 78 | 0 | 0 |
| 1749320048 | 54.04 | 0.3 | 79 | 0 | 0 |
| 1749319448 | 54.53 | 0.34 | 78 | 0 | 0 |
| 1749318848 | 54.53 | 0.27 | 79 | 0 | 0 |
| 1749318248 | 55.5 | 0.22 | 80 | 0 | 0 |
| 1749317648 | 56.97 | 0.24 | 82 | 0 | 0 |
| 1749317048 | 55.99 | 0.3 | 84 | 0 | 0 |
| 1749316448 | 55.02 | 0.4 | 80 | 0 | 0 |
| 1749315848 | 56.48 | 0.24 | 81 | 0 | 0 |
| 1749315248 | 55.99 | 0.21 | 87 | 0 | 0 |
| 1749314648 | 54.53 | 0.26 | 80 | 0 | 0 |
| 1749314048 | 55.5 | 0.2 | 81 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)