APRS Track Direct

My position About ☰

reset

KD5NDU-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KD5NDU-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274712	14.18 Volt	20 Pkt	20 Pkt	9 Pcnt
1836274564	14.18 Volt	20 Pkt	20 Pkt	8 Pcnt
1836274562	14.18 Volt	20 Pkt	20 Pkt	8 Pcnt
1836274412	14.18 Volt	20 Pkt	20 Pkt	9 Pcnt
1836274262	14.18 Volt	20 Pkt	20 Pkt	9 Pcnt
1836274115	14.18 Volt	20 Pkt	20 Pkt	10 Pcnt
1836274112	14.18 Volt	20 Pkt	20 Pkt	10 Pcnt
1762289268	13.95 Volt	0 Pkt	0 Pkt	35 Pcnt
1762288968	13.95 Volt	0 Pkt	0 Pkt	33 Pcnt
1762288668	13.95 Volt	0 Pkt	0 Pkt	31 Pcnt
1762288368	13.95 Volt	0 Pkt	0 Pkt	33 Pcnt
1762288068	13.95 Volt	0 Pkt	0 Pkt	26 Pcnt
1762287768	13.95 Volt	0 Pkt	0 Pkt	29 Pcnt
1762287468	13.95 Volt	10 Pkt	10 Pkt	32 Pcnt
1762287168	13.95 Volt	10 Pkt	10 Pkt	27 Pcnt
1762286868	13.95 Volt	10 Pkt	10 Pkt	28 Pcnt
1762286568	13.95 Volt	10 Pkt	10 Pkt	29 Pcnt
1762286268	13.73 Volt	10 Pkt	10 Pkt	27 Pcnt
1762285968	13.95 Volt	10 Pkt	10 Pkt	25 Pcnt
1762285670	13.95 Volt	10 Pkt	10 Pkt	25 Pcnt
1762285368	13.8 Volt	10 Pkt	0 Pkt	23 Pcnt
1762285068	13.95 Volt	10 Pkt	0 Pkt	22 Pcnt
1762284768	13.95 Volt	0 Pkt	0 Pkt	19 Pcnt
1762284468	13.95 Volt	0 Pkt	0 Pkt	20 Pcnt
1762284168	13.95 Volt	0 Pkt	0 Pkt	15 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)