APRS Track Direct

My position About ☰

reset

IR4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg10m*	Eff1h*	Temp*
1742055879	14.25 Volt	53 Pkt	29 Pkt	47 Pcnt	8 C
1742055878	14.25 Volt	53 Pkt	29 Pkt	47 Pcnt	8 C
1742055578	14.25 Volt	64 Pkt	32 Pkt	48 Pcnt	8 C
1742055280	13.95 Volt	45 Pkt	25 Pkt	48 Pcnt	8.5 C
1742055279	13.95 Volt	45 Pkt	25 Pkt	48 Pcnt	8.5 C
1742054978	14.25 Volt	43 Pkt	22 Pkt	49 Pcnt	8 C
1742054679	14.25 Volt	59 Pkt	33 Pkt	50 Pcnt	8 C
1742054678	14.25 Volt	59 Pkt	33 Pkt	50 Pcnt	8 C
1742054378	14.25 Volt	60 Pkt	28 Pkt	53 Pcnt	8 C
1742054079	14.25 Volt	63 Pkt	26 Pkt	53 Pcnt	8.5 C
1742054078	14.25 Volt	63 Pkt	26 Pkt	53 Pcnt	8.5 C
1742053778	14.25 Volt	58 Pkt	28 Pkt	54 Pcnt	8.5 C
1742053479	14.25 Volt	60 Pkt	27 Pkt	53 Pcnt	8.5 C
1742053479	14.25 Volt	60 Pkt	27 Pkt	53 Pcnt	8.5 C
1742053178	14.25 Volt	63 Pkt	23 Pkt	54 Pcnt	8 C
1742052879	14.18 Volt	59 Pkt	22 Pkt	55 Pcnt	8 C
1742052879	14.18 Volt	59 Pkt	22 Pkt	55 Pcnt	8 C
1742052578	14.25 Volt	66 Pkt	25 Pkt	55 Pcnt	8.5 C
1742052279	14.25 Volt	67 Pkt	29 Pkt	55 Pcnt	8.5 C
1742052279	14.25 Volt	67 Pkt	29 Pkt	55 Pcnt	8.5 C
1742051979	13.88 Volt	67 Pkt	29 Pkt	55 Pcnt	8.5 C
1742051679	14.25 Volt	65 Pkt	27 Pkt	57 Pcnt	8.5 C
1742051679	14.25 Volt	65 Pkt	27 Pkt	57 Pcnt	8.5 C
1742051379	14.25 Volt	76 Pkt	31 Pkt	58 Pcnt	8.5 C
1742051079	14.25 Volt	73 Pkt	31 Pkt	58 Pcnt	8.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)