This is the latest recevied telemetry packets stored in our database for station/object M0BPQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | Dg1h* | Eff1h* | A4* | A5* |
---|---|---|---|---|---|
1718716430 | 0 Pkt | 0 Pkt | 35 Pcnt | 0 None | 0 None |
1718716130 | 0 Pkt | 0 Pkt | 42 Pcnt | 0 None | 0 None |
1718715829 | 0 Pkt | 0 Pkt | 40 Pcnt | 0 None | 0 None |
1718715529 | 0 Pkt | 0 Pkt | 33 Pcnt | 0 None | 0 None |
1718715229 | 0 Pkt | 0 Pkt | 36 Pcnt | 0 None | 0 None |
1718714929 | 0 Pkt | 0 Pkt | 45 Pcnt | 0 None | 0 None |
1718714628 | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None | 0 None |
1718714328 | 0 Pkt | 0 Pkt | 57 Pcnt | 0 None | 0 None |
1718714028 | 10 Pkt | 0 Pkt | 58 Pcnt | 0 None | 0 None |
1718713427 | 10 Pkt | 0 Pkt | 68 Pcnt | 0 None | 0 None |
1718713127 | 10 Pkt | 0 Pkt | 68 Pcnt | 0 None | 0 None |
1718712826 | 10 Pkt | 0 Pkt | 70 Pcnt | 0 None | 0 None |
1718712526 | 10 Pkt | 0 Pkt | 69 Pcnt | 0 None | 0 None |
1718712226 | 10 Pkt | 0 Pkt | 75 Pcnt | 0 None | 0 None |
1718711926 | 20 Pkt | 0 Pkt | 76 Pcnt | 0 None | 0 None |
1718711625 | 10 Pkt | 0 Pkt | 76 Pcnt | 0 None | 0 None |
1718711325 | 10 Pkt | 0 Pkt | 70 Pcnt | 0 None | 0 None |
1718711025 | 10 Pkt | 0 Pkt | 69 Pcnt | 0 None | 0 None |
1718710724 | 10 Pkt | 0 Pkt | 69 Pcnt | 0 None | 0 None |
1718710424 | 10 Pkt | 0 Pkt | 68 Pcnt | 0 None | 0 None |
1718710124 | 10 Pkt | 0 Pkt | 63 Pcnt | 0 None | 0 None |
1718709823 | 10 Pkt | 0 Pkt | 54 Pcnt | 0 None | 0 None |
1718709523 | 10 Pkt | 0 Pkt | 56 Pcnt | 0 None | 0 None |
1718709223 | 10 Pkt | 0 Pkt | 56 Pcnt | 0 None | 0 None |
1718708923 | 10 Pkt | 0 Pkt | 54 Pcnt | 0 None | 0 None |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A4: 0, 0, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)