This is the latest recevied telemetry packets stored in our database for station/object W1WRA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732307165 | 53.56 | 0.13 | 338 | 0 | 0 |
| 1732306565 | 53.07 | 0.17 | 339 | 0 | 0 |
| 1732305965 | 54.04 | 0.18 | 339 | 0 | 0 |
| 1732305365 | 54.53 | 0.2 | 339 | 0 | 0 |
| 1732304765 | 54.04 | 0.12 | 340 | 0 | 0 |
| 1732304165 | 53.07 | 0.16 | 340 | 0 | 0 |
| 1732303565 | 53.56 | 0.2 | 341 | 0 | 0 |
| 1732302965 | 54.04 | 0.13 | 341 | 0 | 0 |
| 1732302365 | 53.56 | 0.16 | 342 | 0 | 0 |
| 1732301764 | 53.07 | 0.16 | 342 | 0 | 0 |
| 1732301164 | 53.07 | 0.15 | 342 | 0 | 0 |
| 1732300564 | 54.53 | 0.22 | 342 | 0 | 0 |
| 1732299964 | 54.53 | 0.2 | 344 | 0 | 0 |
| 1732299364 | 54.04 | 0.19 | 344 | 0 | 0 |
| 1732298764 | 54.04 | 0.13 | 344 | 0 | 0 |
| 1732298164 | 54.04 | 0.15 | 345 | 0 | 0 |
| 1732297564 | 53.56 | 0.21 | 345 | 0 | 0 |
| 1732296964 | 53.56 | 0.2 | 345 | 0 | 0 |
| 1732296364 | 54.04 | 0.18 | 346 | 0 | 0 |
| 1732295763 | 53.07 | 0.18 | 346 | 0 | 0 |
| 1732295163 | 53.56 | 0.14 | 346 | 0 | 0 |
| 1732294563 | 54.04 | 0.17 | 347 | 0 | 0 |
| 1732293963 | 53.56 | 0.19 | 348 | 0 | 0 |
| 1732293363 | 53.56 | 0.16 | 348 | 0 | 0 |
| 1732292763 | 53.07 | 0.18 | 348 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)