APRS Track Direct

My position About ☰

reset

HS3PIK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3PIK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1749317078	1 Pkt	21 Pkt	12 Pkt	42 dB	19200 bps
1749316478	0 Pkt	20 Pkt	10 Pkt	40 dB	19200 bps
1749315878	0 Pkt	14 Pkt	9 Pkt	40 dB	19200 bps
1749315278	2 Pkt	27 Pkt	12 Pkt	39 dB	19200 bps
1749314678	0 Pkt	11 Pkt	6 Pkt	38 dB	19200 bps
1749314078	0 Pkt	10 Pkt	7 Pkt	39 dB	19200 bps
1749313538	0 Pkt	0 Pkt	0 Pkt	40 dB	19200 bps
1749313454	0 Pkt	5 Pkt	0 Pkt	40 dB	5 bps
1749313352	0 Pkt	15 Pkt	1 Pkt	40 dB	5 bps
1749312815	0 Pkt	0 Pkt	0 Pkt	40 dB	19200 bps
1749312461	0 Pkt	1 Pkt	0 Pkt	39 dB	0 bps
1749312452	0 Pkt	6 Pkt	0 Pkt	39 dB	0 bps
1749312408	0 Pkt	13 Pkt	0 Pkt	40 dB	0 bps
1749311872	0 Pkt	0 Pkt	0 Pkt	41 dB	19200 bps
1749311796	0 Pkt	1 Pkt	0 Pkt	39 dB	0 bps
1749311787	0 Pkt	17 Pkt	12 Pkt	38 dB	0 bps
1749311358	1 Pkt	10 Pkt	6 Pkt	39 dB	19200 bps
1749310824	0 Pkt	0 Pkt	1 Pkt	39 dB	19200 bps
1749310447	0 Pkt	2 Pkt	0 Pkt	41 dB	6 bps
1749310437	0 Pkt	5 Pkt	0 Pkt	40 dB	6 bps
1749310344	0 Pkt	7 Pkt	2 Pkt	39 dB	6 bps
1749309807	0 Pkt	0 Pkt	0 Pkt	40 dB	19200 bps
1749309555	0 Pkt	0 Pkt	0 Pkt	41 dB	3 bps
1749309547	0 Pkt	24 Pkt	2 Pkt	39 dB	3 bps
1749309056	0 Pkt	7 Pkt	4 Pkt	40 dB	19200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)