APRS Track Direct

My position About ☰

reset

W3NEP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W3NEP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	CbTmp*
1790640911	13.05 Volt	550 Pkt	140 Pkt	69 Pcnt	68 F
1790639051	13.05 Volt	550 Pkt	140 Pkt	68 Pcnt	67.1 F
1790637191	13.05 Volt	630 Pkt	170 Pkt	73 Pcnt	65.3 F
1790635331	13.05 Volt	640 Pkt	180 Pkt	74 Pcnt	60.8 F
1790633471	13.05 Volt	580 Pkt	150 Pkt	74 Pcnt	63.5 F
1790631611	13.05 Volt	570 Pkt	160 Pkt	73 Pcnt	69.8 F
1790629752	12.98 Volt	590 Pkt	190 Pkt	68 Pcnt	69.8 F
1790627895	13.05 Volt	650 Pkt	220 Pkt	69 Pcnt	69.8 F
1790626032	12.98 Volt	700 Pkt	210 Pkt	74 Pcnt	68.9 F
1790624172	12.98 Volt	670 Pkt	180 Pkt	75 Pcnt	68.9 F
1790622312	12.98 Volt	540 Pkt	150 Pkt	74 Pcnt	68 F
1790620452	12.98 Volt	540 Pkt	140 Pkt	73 Pcnt	67.1 F
1790618592	13.05 Volt	560 Pkt	160 Pkt	77 Pcnt	65.3 F
1790616733	12.98 Volt	550 Pkt	150 Pkt	75 Pcnt	63.5 F
1790614872	13.05 Volt	610 Pkt	150 Pkt	75 Pcnt	60.8 F
1790613012	12.98 Volt	600 Pkt	140 Pkt	75 Pcnt	64.4 F
1790611152	13.05 Volt	560 Pkt	140 Pkt	76 Pcnt	69.8 F
1790609292	13.05 Volt	560 Pkt	150 Pkt	76 Pcnt	69.8 F
1790607433	13.05 Volt	530 Pkt	150 Pkt	72 Pcnt	69.8 F
1790605574	13.05 Volt	510 Pkt	140 Pkt	71 Pcnt	69.8 F
1790603713	13.05 Volt	500 Pkt	140 Pkt	69 Pcnt	69.8 F
1790601853	12.98 Volt	500 Pkt	140 Pkt	66 Pcnt	69.8 F
1790599993	12.98 Volt	490 Pkt	140 Pkt	66 Pcnt	68.9 F
1790598133	13.05 Volt	510 Pkt	140 Pkt	71 Pcnt	69.8 F
1790596273	12.98 Volt	530 Pkt	150 Pkt	71 Pcnt	68.9 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CbTmp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)