APRS Track Direct

My position About ☰

reset

YB1SDL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1SDL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Water*	Temp*	Humid*	Press*	Volt*
1786755756	2.98 m	37.16 C	80 %	1022.99 hPa	6.83 V
1786755456	2.95 m	35.59 C	36.94 %	1053.98 hPa	4.83 V
1786755156	3 m	32.45 C	23.06 %	982.85 hPa	5.49 V
1786754856	2.8 m	40.69 C	75.29 %	987.62 hPa	6.81 V
1786754256	3 m	43.35 C	22.35 %	1009.87 hPa	5.6 V
1786753956	2.76 m	25.94 C	46.82 %	962.59 hPa	6.87 V
1786753656	2.85 m	44.53 C	80 %	1040.87 hPa	4.83 V
1786753056	3 m	42.18 C	28.24 %	970.14 hPa	6.97 V
1786752756	2.81 m	28.45 C	71.53 %	1008.28 hPa	4.7 V
1786752456	2.99 m	39.04 C	64 %	1062.72 hPa	5.55 V
1786752156	3 m	35.43 C	21.88 %	993.58 hPa	6.9 V
1786751856	2.87 m	31.75 C	49.65 %	974.91 hPa	4.88 V
1786751556	2.88 m	39.67 C	78.82 %	1051.99 hPa	5.6 V
1786750956	2.91 m	44.06 C	23.53 %	967.75 hPa	4.89 V
1786750355	2.79 m	45 C	67.29 %	1061.53 hPa	6.8 V
1786749756	2.81 m	42.65 C	49.65 %	989.61 hPa	5.49 V
1786749156	3 m	38.8 C	38.59 %	1015.83 hPa	4.85 V
1786748855	2.85 m	34.73 C	27.53 %	964.97 hPa	5.68 V
1786748556	2.81 m	33.31 C	69.65 %	1042.06 hPa	6.9 V
1786748255	2.91 m	39.51 C	66.12 %	1048.42 hPa	4.84 V
1786747955	2.94 m	27.67 C	22.12 %	972.12 hPa	5.64 V
1786747055	2.92 m	45 C	39.06 %	991.2 hPa	5.43 V
1786746455	2.81 m	42.8 C	73.65 %	1051.99 hPa	4.67 V
1786746155	2.81 m	30.18 C	63.29 %	1027.36 hPa	5.6 V
1786745855	2.86 m	37.63 C	22.12 %	962.59 hPa	6.88 V

*Used Equation Coefficients:

Water: 0, 0.011765, 0

Temp: 0, 0.078431, 25

Humid: 0, 0.235294, 20

Press: 0, 0.397353, 962.5875

Volt: 0, 0.009804, 4.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)