APRS Track Direct

My position About ☰

reset

ARSTRA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ARSTRA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790632284	12.96 Volt	380 Pkt	250 Pkt	81 Pcnt
1790631983	12.96 Volt	380 Pkt	240 Pkt	82 Pcnt
1790631683	13.03 Volt	380 Pkt	240 Pkt	81 Pcnt
1790631082	13.03 Volt	380 Pkt	240 Pkt	80 Pcnt
1790630782	13.03 Volt	390 Pkt	240 Pkt	80 Pcnt
1790630483	13.03 Volt	380 Pkt	240 Pkt	79 Pcnt
1790630182	13.03 Volt	390 Pkt	240 Pkt	79 Pcnt
1790629882	13.03 Volt	400 Pkt	240 Pkt	80 Pcnt
1790629584	13.03 Volt	380 Pkt	230 Pkt	79 Pcnt
1790629282	13.03 Volt	390 Pkt	230 Pkt	80 Pcnt
1790628980	13.03 Volt	390 Pkt	230 Pkt	79 Pcnt
1790628681	13.03 Volt	390 Pkt	240 Pkt	79 Pcnt
1790628380	13.03 Volt	390 Pkt	240 Pkt	78 Pcnt
1790628080	13.03 Volt	390 Pkt	240 Pkt	79 Pcnt
1790627781	13.03 Volt	400 Pkt	240 Pkt	81 Pcnt
1790627480	13.03 Volt	390 Pkt	240 Pkt	81 Pcnt
1790627179	13.03 Volt	390 Pkt	250 Pkt	82 Pcnt
1790626578	13.03 Volt	410 Pkt	260 Pkt	82 Pcnt
1790626278	13.03 Volt	420 Pkt	260 Pkt	82 Pcnt
1790625677	13.03 Volt	420 Pkt	270 Pkt	83 Pcnt
1790625377	13.1 Volt	430 Pkt	270 Pkt	84 Pcnt
1790625078	13.1 Volt	420 Pkt	270 Pkt	83 Pcnt
1790624776	13.03 Volt	430 Pkt	270 Pkt	83 Pcnt
1790624477	13.1 Volt	430 Pkt	270 Pkt	81 Pcnt
1790624178	13.1 Volt	430 Pkt	270 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.0728, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)