APRS Track Direct

My position About ☰

reset

IR2UGB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UGB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1774103565	45 Pkt	240 Pkt	0.05 Pcnt	83 Pcnt
1774103264	27 Pkt	240 Pkt	0.05 Pcnt	84 Pcnt
1774102964	30 Pkt	240 Pkt	0.05 Pcnt	84 Pcnt
1774102664	30 Pkt	240 Pkt	0.05 Pcnt	83 Pcnt
1774102363	40 Pkt	250 Pkt	0.05 Pcnt	84 Pcnt
1774102063	41 Pkt	250 Pkt	0.05 Pcnt	84 Pcnt
1774101763	36 Pkt	240 Pkt	0.05 Pcnt	83 Pcnt
1774101464	33 Pkt	230 Pkt	0.05 Pcnt	82 Pcnt
1774101162	31 Pkt	230 Pkt	0.05 Pcnt	82 Pcnt
1774100862	32 Pkt	230 Pkt	0.05 Pcnt	80 Pcnt
1774100562	36 Pkt	230 Pkt	0.05 Pcnt	80 Pcnt
1774100261	51 Pkt	240 Pkt	0.05 Pcnt	81 Pcnt
1774099961	43 Pkt	230 Pkt	0.05 Pcnt	81 Pcnt
1774099661	27 Pkt	230 Pkt	0.05 Pcnt	79 Pcnt
1774099361	35 Pkt	230 Pkt	0.05 Pcnt	79 Pcnt
1774099060	39 Pkt	240 Pkt	0.05 Pcnt	79 Pcnt
1774098760	34 Pkt	240 Pkt	0.05 Pcnt	78 Pcnt
1774098460	30 Pkt	230 Pkt	0.05 Pcnt	78 Pcnt
1774098159	35 Pkt	240 Pkt	0.05 Pcnt	78 Pcnt
1774097859	31 Pkt	230 Pkt	0.05 Pcnt	78 Pcnt
1774097559	34 Pkt	240 Pkt	0.05 Pcnt	78 Pcnt
1774097259	40 Pkt	240 Pkt	0.05 Pcnt	80 Pcnt
1774096958	36 Pkt	250 Pkt	0.05 Pcnt	79 Pcnt
1774096658	38 Pkt	250 Pkt	0.05 Pcnt	80 Pcnt
1774096358	33 Pkt	250 Pkt	0.05 Pcnt	79 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)