APRS Track Direct

My position About ☰

reset

HS3UAA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3UAA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1732288744	12 ug/m3	18 ug/m3	20 ug/m3	-38 dBm	13.99 V
1732288422	13 ug/m3	15 ug/m3	16 ug/m3	-38 dBm	14.05 V
1732288100	11 ug/m3	15 ug/m3	16 ug/m3	-38 dBm	13.99 V
1732287778	12 ug/m3	16 ug/m3	18 ug/m3	-39 dBm	14.05 V
1732287456	13 ug/m3	19 ug/m3	32 ug/m3	-38 dBm	14.05 V
1732287134	13 ug/m3	18 ug/m3	23 ug/m3	-38 dBm	14.05 V
1732286812	12 ug/m3	15 ug/m3	17 ug/m3	-38 dBm	14.05 V
1732286490	13 ug/m3	17 ug/m3	21 ug/m3	-38 dBm	14.05 V
1732286168	13 ug/m3	20 ug/m3	22 ug/m3	-38 dBm	13.99 V
1732285846	12 ug/m3	17 ug/m3	19 ug/m3	-42 dBm	14.05 V
1732285524	11 ug/m3	15 ug/m3	16 ug/m3	-38 dBm	14.05 V
1732285128	13 ug/m3	19 ug/m3	19 ug/m3	-39 dBm	14.05 V
1732284806	14 ug/m3	20 ug/m3	21 ug/m3	-39 dBm	14.05 V
1732284484	11 ug/m3	15 ug/m3	19 ug/m3	-39 dBm	14.07 V
1732284162	10 ug/m3	17 ug/m3	17 ug/m3	-39 dBm	14.05 V
1732283840	14 ug/m3	16 ug/m3	17 ug/m3	-40 dBm	14.05 V
1732283518	12 ug/m3	16 ug/m3	16 ug/m3	-38 dBm	13.99 V
1732283196	13 ug/m3	16 ug/m3	16 ug/m3	-38 dBm	14.07 V
1732282874	13 ug/m3	19 ug/m3	21 ug/m3	-38 dBm	13.99 V
1732282426	13 ug/m3	19 ug/m3	21 ug/m3	-42 dBm	14.05 V
1732282104	13 ug/m3	18 ug/m3	33 ug/m3	-39 dBm	14.07 V
1732281869	13 ug/m3	16 ug/m3	19 ug/m3	-42 dBm	14.05 V
1732281547	13 ug/m3	16 ug/m3	29 ug/m3	-41 dBm	14.05 V
1732281225	11 ug/m3	16 ug/m3	16 ug/m3	-42 dBm	14.05 V
1732280903	14 ug/m3	19 ug/m3	20 ug/m3	-42 dBm	14.05 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)