APRS Track Direct

My position About ☰

reset

BA5AG-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BA5AG-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BattV*	ChgA*	LoadA*	NetA*	Mains*
1790665748	13.3 V	8 A	1.1 A	6.9 A	1 on
1790665441	13.3 V	8 A	1.9 A	6.2 A	1 on
1790665139	13.3 V	8 A	1.2 A	6.8 A	1 on
1790664838	13.3 V	8 A	1.9 A	6.1 A	1 on
1790664532	13.3 V	8 A	1.8 A	6.2 A	1 on
1790664231	13.3 V	8 A	1.1 A	6.9 A	1 on
1790663924	13.3 V	8 A	1.1 A	6.9 A	1 on
1790663613	13.3 V	8 A	1.1 A	6.9 A	1 on
1790663312	13.3 V	8 A	1.8 A	6.2 A	1 on
1790662701	13.3 V	8 A	1.8 A	6.2 A	1 on
1790662399	13.3 V	8 A	1.2 A	6.9 A	1 on
1790662098	13.3 V	8 A	1.1 A	6.9 A	1 on
1790661797	13.3 V	8 A	1.8 A	6.2 A	1 on
1790661491	13.3 V	8 A	1.8 A	6.2 A	1 on
1790660879	13.3 V	8 A	1.1 A	6.9 A	1 on
1790660567	13.3 V	8 A	1.9 A	6.1 A	1 on
1790660260	13.3 V	8 A	1.9 A	6.1 A	1 on
1790659620	13.2 V	8 A	1.2 A	6.9 A	1 on
1790659318	13.2 V	8 A	1.9 A	6.1 A	1 on
1790658396	13.2 V	8 A	1.2 A	6.9 A	1 on
1790658089	13.2 V	8 A	1.8 A	6.2 A	1 on
1790657787	13.2 V	8 A	1.1 A	6.9 A	1 on
1790657476	13.2 V	8 A	1.2 A	6.8 A	1 on
1790657169	13.2 V	8 A	1.9 A	6.2 A	1 on
1790656558	13.2 V	8 A	1.8 A	6.2 A	1 on

*Used Equation Coefficients:

BattV: 0, 0.1, 0

ChgA: 0, 0.1, 0

LoadA: 0, 0.1, 0

NetA: 0, 0.1, -10

Mains: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)