This is the latest recevied telemetry packets stored in our database for station/object VE1NWC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794864044 | 525 | 509 | 0 | 508 | 108 |
| 1794863442 | 525 | 510 | 0 | 508 | 109 |
| 1794861639 | 526 | 515 | 0 | 508 | 109 |
| 1794860437 | 526 | 530 | 0 | 507 | 110 |
| 1794859839 | 525 | 532 | 0 | 508 | 111 |
| 1794858630 | 530 | 534 | 0 | 511 | 111 |
| 1794857425 | 534 | 703 | 0 | 516 | 111 |
| 1794856217 | 560 | 568 | 0 | 542 | 111 |
| 1794855009 | 571 | 583 | 0 | 554 | 111 |
| 1794853801 | 560 | 754 | 0 | 542 | 112 |
| 1794851392 | 560 | 754 | 0 | 541 | 111 |
| 1794848984 | 571 | 583 | 0 | 553 | 112 |
| 1794847780 | 556 | 754 | 0 | 538 | 112 |
| 1794845374 | 557 | 753 | 0 | 541 | 111 |
| 1794844164 | 557 | 754 | 0 | 540 | 111 |
| 1794842962 | 557 | 753 | 0 | 539 | 111 |
| 1794840552 | 557 | 756 | 0 | 541 | 111 |
| 1794839953 | 560 | 754 | 0 | 541 | 110 |
| 1794838141 | 561 | 755 | 0 | 543 | 109 |
| 1794837538 | 561 | 755 | 0 | 543 | 109 |
| 1794836329 | 556 | 577 | 0 | 537 | 108 |
| 1794833912 | 546 | 566 | 0 | 528 | 107 |
| 1794833312 | 545 | 562 | 0 | 526 | 107 |
| 1794832104 | 537 | 550 | 0 | 519 | 106 |
| 1794829695 | 521 | 526 | 0 | 503 | 106 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)