This is the latest recevied telemetry packets stored in our database for station/object LU9HOO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719840808 | 16 Pkt | 2 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719839883 | 14 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719838956 | 6 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 11.5 V |
1719838033 | 9 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 11.5 V |
1719837109 | 7 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 11.5 V |
1719836186 | 33 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719835256 | 27 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719834327 | 42 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719833399 | 23 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719832472 | 35 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719831541 | 15 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719830616 | 31 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719829688 | 23 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719828761 | 28 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719827836 | 25 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719826907 | 36 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719825979 | 37 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 11.5 V |
1719825049 | 18 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719824123 | 32 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719823195 | 28 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719822269 | 44 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 11.5 V |
1719821337 | 26 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 11.5 V |
1719820408 | 49 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719819479 | 30 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
1719818552 | 35 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 11.5 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)