APRS Track Direct

My position About ☰

reset

YO2LYN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO2LYN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Eff1h*	Vbat*	Ibat*	Isolar*	Temp*
1790640135	69 %	12.6 V	-1.56 A	0.01 A	9.5 C
1790639536	68 %	12.6 V	-1.76 A	0.01 A	10 C
1790639535	68 %	12.6 V	-1.76 A	0.01 A	10 C
1790638935	66 %	12.6 V	-1.76 A	0.01 A	10 C
1790638036	62 %	12.7 V	-1.76 A	0.01 A	10 C
1790636536	59 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790636535	59 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790635935	60 %	12.7 V	-1.56 A	0.01 A	10.5 C
1790635335	59 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790635036	59 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790634735	60 %	12.7 V	-1.56 A	0.01 A	10.5 C
1790634135	62 %	12.7 V	-1.56 A	0.01 A	10.5 C
1790633536	63 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790633535	63 %	12.7 V	-1.76 A	0.01 A	10.5 C
1790632935	65 %	12.7 V	-1.56 A	0.01 A	11 C
1790632335	65 %	12.7 V	-1.56 A	0.01 A	11 C
1790632036	66 %	12.7 V	-1.76 A	0.01 A	11 C
1790631735	67 %	12.7 V	-1.76 A	0.01 A	11 C
1790631135	69 %	12.7 V	-1.56 A	0.01 A	11 C
1790630536	69 %	12.7 V	-1.76 A	0.01 A	11 C
1790630535	69 %	12.7 V	-1.76 A	0.01 A	11 C
1790629935	73 %	12.7 V	-1.76 A	0.01 A	11 C
1790629335	73 %	12.7 V	-1.56 A	0.01 A	11.5 C
1790629036	72 %	12.7 V	-1.76 A	0.01 A	11.5 C
1790628735	75 %	12.7 V	-1.56 A	0.01 A	11.5 C

*Used Equation Coefficients:

Eff1h: 0, 1, 0

Vbat: 0, 0.1, 0

Ibat: 0, 0.1953, -24.9984

Isolar: 0, 0.1953, -24.9884

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)