This is the latest recevied telemetry packets stored in our database for station/object N6BB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790661198 | 2.96 VDC | 0 | 0 | 0 | 0 |
| 1790660298 | 3.12 VDC | 0 | 0 | 0 | 0 |
| 1790659398 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1790658498 | 3.26 VDC | 0 | 0 | 0 | 0 |
| 1790657597 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1790656697 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1790655797 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1790654897 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1790653997 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1790653096 | 4 VDC | 0 | 0 | 0 | 0 |
| 1790652196 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1790651296 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1790650396 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1790649495 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1790648595 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1790647695 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1790646795 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1790645895 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1790644994 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790644094 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790643194 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790642294 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790641393 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1790640493 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790639593 | 4.3 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)