This is the latest recevied telemetry packets stored in our database for station/object DM7HF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749329488 | 22.9 deg C | 61.4 % | 0 | 0 | 0 |
| 1749328589 | 22.6 deg C | 62.5 % | 0 | 0 | 0 |
| 1749327688 | 22 deg C | 64.5 % | 0 | 0 | 0 |
| 1749326787 | 21.9 deg C | 64.7 % | 0 | 0 | 0 |
| 1749325875 | 22.1 deg C | 64.8 % | 0 | 0 | 0 |
| 1749324980 | 22.4 deg C | 63.8 % | 0 | 0 | 0 |
| 1749324083 | 23 deg C | 62.4 % | 0 | 0 | 0 |
| 1749323182 | 23.7 deg C | 60.7 % | 0 | 0 | 0 |
| 1749322282 | 24.6 deg C | 59.9 % | 0 | 0 | 0 |
| 1749321377 | 24.6 deg C | 59.4 % | 0 | 0 | 0 |
| 1749320476 | 24.5 deg C | 59.7 % | 0 | 0 | 0 |
| 1749319581 | 24.1 deg C | 60.1 % | 0 | 0 | 0 |
| 1749318685 | 24.4 deg C | 58.5 % | 0 | 0 | 0 |
| 1749317787 | 24.9 deg C | 56.4 % | 0 | 0 | 0 |
| 1749316892 | 24.7 deg C | 56.9 % | 0 | 0 | 0 |
| 1749315993 | 24.5 deg C | 56.4 % | 0 | 0 | 0 |
| 1749315685 | 24.2 deg C | 56.3 % | 0 | 0 | 0 |
| 1749314789 | 24.6 deg C | 53.6 % | 0 | 0 | 0 |
| 1749313888 | 25 deg C | 53 % | 0 | 0 | 0 |
| 1749312993 | 25.1 deg C | 51.7 % | 0 | 0 | 0 |
| 1749312089 | 24.9 deg C | 51.9 % | 0 | 0 | 0 |
| 1749311194 | 24.7 deg C | 53 % | 0 | 0 | 0 |
| 1749310290 | 25.3 deg C | 53.9 % | 0 | 0 | 0 |
| 1749309385 | 25.1 deg C | 56.8 % | 0 | 0 | 0 |
| 1749308487 | 25.3 deg C | 56.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)