This is the latest recevied telemetry packets stored in our database for station/object OH5GWF-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719842559 | 157 | 215 | 122 | 0 | 0 |
1719840036 | 157 | 215 | 122 | 0 | 0 |
1719837513 | 157 | 219 | 124 | 0 | 0 |
1719834990 | 157 | 218 | 124 | 0 | 0 |
1719832467 | 157 | 219 | 124 | 0 | 0 |
1719829945 | 157 | 219 | 124 | 0 | 0 |
1719827422 | 156 | 220 | 125 | 0 | 0 |
1719824899 | 155 | 222 | 127 | 0 | 0 |
1719822376 | 155 | 215 | 124 | 0 | 0 |
1719819853 | 156 | 214 | 123 | 0 | 0 |
1719817331 | 156 | 220 | 126 | 0 | 0 |
1719814808 | 155 | 221 | 128 | 0 | 0 |
1719812285 | 154 | 216 | 127 | 0 | 0 |
1719809762 | 153 | 222 | 130 | 0 | 0 |
1719807239 | 152 | 214 | 127 | 0 | 0 |
1719804716 | 152 | 208 | 124 | 0 | 0 |
1719802193 | 152 | 208 | 123 | 0 | 0 |
1719799671 | 152 | 209 | 124 | 0 | 0 |
1719797148 | 152 | 209 | 124 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)