This is the latest recevied telemetry packets stored in our database for station/object IU1VDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786785669 | 0 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1786784769 | 0 Count | 699 Count | 0 Count | 0 VDC | 0 VDC |
| 1786783869 | 0 Count | 693 Count | 0 Count | 0 VDC | 0 VDC |
| 1786782969 | 0 Count | 689 Count | 0 Count | 0 VDC | 0 VDC |
| 1786782069 | 0 Count | 684 Count | 0 Count | 0 VDC | 0 VDC |
| 1786781169 | 0 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1786780269 | 0 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1786779370 | 0 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1786778470 | 0 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1786777570 | 0 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1786776670 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1786775770 | 0 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1786774870 | 0 Count | 638 Count | 0 Count | 0 VDC | 0 VDC |
| 1786773970 | 0 Count | 632 Count | 0 Count | 0 VDC | 0 VDC |
| 1786773070 | 0 Count | 626 Count | 0 Count | 0 VDC | 0 VDC |
| 1786772170 | 0 Count | 623 Count | 0 Count | 0 VDC | 0 VDC |
| 1786771270 | 0 Count | 619 Count | 0 Count | 0 VDC | 0 VDC |
| 1786770370 | 0 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
| 1786769470 | 0 Count | 610 Count | 0 Count | 0 VDC | 0 VDC |
| 1786768570 | 0 Count | 607 Count | 0 Count | 0 VDC | 0 VDC |
| 1786767670 | 0 Count | 603 Count | 0 Count | 0 VDC | 0 VDC |
| 1786766770 | 0 Count | 599 Count | 0 Count | 0 VDC | 0 VDC |
| 1786765870 | 0 Count | 592 Count | 0 Count | 0 VDC | 0 VDC |
| 1786764970 | 0 Count | 590 Count | 0 Count | 0 VDC | 0 VDC |
| 1786764069 | 0 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)