APRS Track Direct

My position About ☰

reset

IR4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg10m*	Eff1h*	Temp*
1750146919	14.25 Volt	77 Pkt	56 Pkt	63 Pcnt	20.5 C
1750146619	13.8 Volt	82 Pkt	58 Pkt	63 Pcnt	21 C
1750146319	14.25 Volt	77 Pkt	52 Pkt	62 Pcnt	21 C
1750146019	14.25 Volt	85 Pkt	58 Pkt	63 Pcnt	21 C
1750145719	14.25 Volt	87 Pkt	63 Pkt	63 Pcnt	21 C
1750145419	14.25 Volt	81 Pkt	62 Pkt	62 Pcnt	21 C
1750145119	14.25 Volt	64 Pkt	50 Pkt	63 Pcnt	21 C
1750144819	14.25 Volt	77 Pkt	51 Pkt	63 Pcnt	21 C
1750144519	14.25 Volt	70 Pkt	47 Pkt	63 Pcnt	21 C
1750144219	14.25 Volt	66 Pkt	46 Pkt	64 Pcnt	21 C
1750143919	14.25 Volt	73 Pkt	55 Pkt	64 Pcnt	21 C
1750143619	14.18 Volt	65 Pkt	45 Pkt	64 Pcnt	21.5 C
1750143319	14.25 Volt	62 Pkt	36 Pkt	63 Pcnt	21.5 C
1750143019	14.25 Volt	78 Pkt	45 Pkt	64 Pcnt	21.5 C
1750142719	14.25 Volt	85 Pkt	57 Pkt	64 Pcnt	21.5 C
1750142419	14.25 Volt	86 Pkt	59 Pkt	64 Pcnt	22 C
1750142119	14.25 Volt	81 Pkt	51 Pkt	64 Pcnt	22 C
1750141819	14.25 Volt	89 Pkt	55 Pkt	64 Pcnt	22 C
1750141519	12.98 Volt	89 Pkt	57 Pkt	64 Pcnt	22 C
1750141219	13.73 Volt	87 Pkt	48 Pkt	63 Pcnt	22 C
1750140919	13.73 Volt	84 Pkt	55 Pkt	64 Pcnt	21.5 C
1750140619	13.8 Volt	83 Pkt	63 Pkt	64 Pcnt	21.5 C
1750140319	14.25 Volt	78 Pkt	54 Pkt	64 Pcnt	21.5 C
1750140019	13.8 Volt	74 Pkt	50 Pkt	65 Pcnt	21.5 C
1750139719	13.95 Volt	67 Pkt	48 Pkt	65 Pcnt	21.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)