This is the latest recevied telemetry packets stored in our database for station/object DB0ZEA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732545934 | 24.4 deg C | 42.6 % | 0 | 0 | 0 |
| 1732545034 | 24.3 deg C | 42.6 % | 0 | 0 | 0 |
| 1732544704 | 24.4 deg C | 42.6 % | 0 | 0 | 0 |
| 1732543804 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732542904 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732542004 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732541104 | 24.5 deg C | 42.4 % | 0 | 0 | 0 |
| 1732540203 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732539303 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732538403 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732537503 | 24.4 deg C | 42.5 % | 0 | 0 | 0 |
| 1732536603 | 24.4 deg C | 42.4 % | 0 | 0 | 0 |
| 1732535703 | 24.5 deg C | 42.3 % | 0 | 0 | 0 |
| 1732534803 | 24.5 deg C | 42.3 % | 0 | 0 | 0 |
| 1732533903 | 24.3 deg C | 42.4 % | 0 | 0 | 0 |
| 1732533003 | 24.2 deg C | 42.4 % | 0 | 0 | 0 |
| 1732532670 | 24.3 deg C | 42.4 % | 0 | 0 | 0 |
| 1732531770 | 24.3 deg C | 42.4 % | 0 | 0 | 0 |
| 1732530870 | 24.3 deg C | 42.4 % | 0 | 0 | 0 |
| 1732529970 | 24.3 deg C | 42.4 % | 0 | 0 | 0 |
| 1732529070 | 24.3 deg C | 42.5 % | 0 | 0 | 0 |
| 1732528170 | 24.2 deg C | 42.5 % | 0 | 0 | 0 |
| 1732527270 | 24.2 deg C | 42.7 % | 0 | 0 | 0 |
| 1732526370 | 24.1 deg C | 42.7 % | 0 | 0 | 0 |
| 1732525470 | 24.1 deg C | 42.7 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)