APRS Track Direct

My position About ☰

reset

TA3ONK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3ONK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774106500	6 Pkt	13 Pkt	9 Pkt	-58 dBm	12.16 V
1774105877	7 Pkt	11 Pkt	11 Pkt	-52 dBm	12.16 V
1774105253	5 Pkt	10 Pkt	9 Pkt	-53 dBm	12.18 V
1774104630	6 Pkt	9 Pkt	6 Pkt	-47 dBm	12.16 V
1774104007	7 Pkt	12 Pkt	9 Pkt	-47 dBm	12.16 V
1774103383	5 Pkt	10 Pkt	7 Pkt	-60 dBm	12.14 V
1774102759	4 Pkt	11 Pkt	5 Pkt	-59 dBm	12.16 V
1774102136	7 Pkt	14 Pkt	11 Pkt	-57 dBm	12.16 V
1774101512	6 Pkt	6 Pkt	5 Pkt	-59 dBm	12.16 V
1774100951	5 Pkt	11 Pkt	7 Pkt	-86 dBm	12.16 V
1774100271	7 Pkt	14 Pkt	13 Pkt	-89 dBm	12.14 V
1774099624	2 Pkt	11 Pkt	11 Pkt	-86 dBm	12.16 V
1774099011	3 Pkt	8 Pkt	7 Pkt	-88 dBm	12.16 V
1774098388	5 Pkt	10 Pkt	7 Pkt	-85 dBm	12.16 V
1774097776	6 Pkt	15 Pkt	13 Pkt	-86 dBm	12.16 V
1774097174	4 Pkt	13 Pkt	10 Pkt	-86 dBm	12.18 V
1774096518	1 Pkt	6 Pkt	5 Pkt	-86 dBm	12.16 V
1774095899	1 Pkt	14 Pkt	11 Pkt	-86 dBm	12.14 V
1774095267	1 Pkt	7 Pkt	7 Pkt	-88 dBm	12.14 V
1774094640	0 Pkt	11 Pkt	8 Pkt	-86 dBm	12.16 V
1774094095	1 Pkt	16 Pkt	13 Pkt	-80 dBm	12.16 V
1774093394	2 Pkt	7 Pkt	6 Pkt	-81 dBm	12.16 V
1774092770	0 Pkt	11 Pkt	6 Pkt	-82 dBm	12.14 V
1774092148	1 Pkt	29 Pkt	19 Pkt	-81 dBm	12.14 V
1774091523	2 Pkt	25 Pkt	12 Pkt	-83 dBm	12.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)