APRS Track Direct

My position About ☰

reset

9M2WMW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2WMW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732286304	83 Pkt	11 Pkt	4 Pkt	-64 dBm	18.99 V
1732284463	21 Pkt	8 Pkt	4 Pkt	-64 dBm	18.99 V
1732282634	45 Pkt	9 Pkt	9 Pkt	-64 dBm	18.99 V
1732280800	64 Pkt	8 Pkt	5 Pkt	-66 dBm	18.99 V
1732278964	56 Pkt	9 Pkt	7 Pkt	-63 dBm	18.97 V
1732277131	14 Pkt	9 Pkt	9 Pkt	-64 dBm	18.97 V
1732275303	26 Pkt	7 Pkt	7 Pkt	-65 dBm	18.97 V
1732273473	10 Pkt	8 Pkt	8 Pkt	-64 dBm	18.99 V
1732271648	14 Pkt	7 Pkt	5 Pkt	-63 dBm	18.91 V
1732269818	36 Pkt	9 Pkt	6 Pkt	-64 dBm	18.99 V
1732267987	64 Pkt	10 Pkt	9 Pkt	-63 dBm	18.97 V
1732266152	16 Pkt	8 Pkt	4 Pkt	-66 dBm	18.99 V
1732264327	19 Pkt	9 Pkt	9 Pkt	-65 dBm	18.99 V
1732262496	12 Pkt	9 Pkt	3 Pkt	-63 dBm	18.99 V
1732260668	15 Pkt	10 Pkt	7 Pkt	-64 dBm	18.97 V
1732258842	87 Pkt	8 Pkt	7 Pkt	-66 dBm	18.99 V
1732257000	81 Pkt	20 Pkt	10 Pkt	-65 dBm	18.99 V
1732255160	43 Pkt	7 Pkt	6 Pkt	-65 dBm	18.95 V
1732253327	20 Pkt	12 Pkt	6 Pkt	-66 dBm	18.99 V
1732251496	33 Pkt	14 Pkt	7 Pkt	-65 dBm	18.97 V
1732249667	55 Pkt	12 Pkt	7 Pkt	-64 dBm	18.99 V
1732247830	49 Pkt	11 Pkt	8 Pkt	-64 dBm	18.97 V
1732245994	23 Pkt	12 Pkt	8 Pkt	-64 dBm	18.99 V
1732244164	45 Pkt	20 Pkt	5 Pkt	-69 dBm	18.99 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)