This is the latest recevied telemetry packets stored in our database for station/object F1ZRP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tint* | Hint* | RxPkts* | TxPkts* | Value5* |
|---|---|---|---|---|---|
| 1732268807 | 7.8 C | 60.3 % | 2 Count | 15 Count | 0 |
| 1732267607 | 7.8 C | 60.4 % | 1 Count | 24 Count | 0 |
| 1732266406 | 7.8 C | 60.4 % | 2 Count | 20 Count | 0 |
| 1732265206 | 7.8 C | 60.3 % | 2 Count | 15 Count | 0 |
| 1732264006 | 7.8 C | 60.3 % | 1 Count | 19 Count | 0 |
| 1732262806 | 7.8 C | 60.2 % | 2 Count | 21 Count | 0 |
| 1732261606 | 7.8 C | 60.1 % | 2 Count | 17 Count | 0 |
| 1732260406 | 7.8 C | 60 % | 1 Count | 24 Count | 0 |
| 1732259206 | 7.8 C | 60 % | 2 Count | 23 Count | 0 |
*Used Equation Coefficients:
Tint: 0, 1, 0
Hint: 0, 1, 0
RxPkts: 0, 1, 0
TxPkts: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)