APRS Track Direct

My position About ☰

reset

N2RWE-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2RWE-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754192020	13.13 Volt	390 Pkt	70 Pkt	66 Pcnt
1754191420	13.13 Volt	410 Pkt	70 Pkt	66 Pcnt
1754190820	13.13 Volt	420 Pkt	80 Pkt	63 Pcnt
1754189621	12.83 Volt	430 Pkt	80 Pkt	62 Pcnt
1754188420	13.13 Volt	400 Pkt	80 Pkt	58 Pcnt
1754187820	13.2 Volt	390 Pkt	70 Pkt	59 Pcnt
1754187220	13.13 Volt	380 Pkt	60 Pkt	58 Pcnt
1754186623	13.2 Volt	370 Pkt	60 Pkt	56 Pcnt
1754186021	13.2 Volt	350 Pkt	60 Pkt	55 Pcnt
1754185421	13.13 Volt	330 Pkt	60 Pkt	52 Pcnt
1754184820	13.2 Volt	300 Pkt	60 Pkt	49 Pcnt
1754184220	13.2 Volt	270 Pkt	60 Pkt	44 Pcnt
1754183620	13.2 Volt	250 Pkt	60 Pkt	40 Pcnt
1754183021	13.28 Volt	240 Pkt	60 Pkt	36 Pcnt
1754182421	13.05 Volt	230 Pkt	60 Pkt	34 Pcnt
1754181821	13.2 Volt	240 Pkt	60 Pkt	34 Pcnt
1754181221	13.28 Volt	240 Pkt	60 Pkt	32 Pcnt
1754180621	13.28 Volt	210 Pkt	50 Pkt	29 Pcnt
1754180022	13.28 Volt	190 Pkt	50 Pkt	28 Pcnt
1754179422	13.28 Volt	160 Pkt	40 Pkt	27 Pcnt
1754178822	13.2 Volt	130 Pkt	40 Pkt	24 Pcnt
1754178222	13.28 Volt	110 Pkt	30 Pkt	21 Pcnt
1754177624	13.35 Volt	110 Pkt	40 Pkt	23 Pcnt
1754177021	13.35 Volt	100 Pkt	30 Pkt	23 Pcnt
1754175821	13.43 Volt	90 Pkt	30 Pkt	23 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)