This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794903301 | 307 Count | 761 Count | 257 Count | 4.12 VDC | 0 VDC |
| 1794902400 | 299 Count | 749 Count | 250 Count | 4.12 VDC | 0 VDC |
| 1794901500 | 290 Count | 733 Count | 243 Count | 4.12 VDC | 0 VDC |
| 1794900599 | 283 Count | 716 Count | 237 Count | 4.12 VDC | 0 VDC |
| 1794899698 | 277 Count | 696 Count | 232 Count | 4.12 VDC | 0 VDC |
| 1794898797 | 270 Count | 662 Count | 226 Count | 4.12 VDC | 0 VDC |
| 1794897896 | 259 Count | 639 Count | 216 Count | 4.12 VDC | 0 VDC |
| 1794896996 | 249 Count | 604 Count | 207 Count | 4.12 VDC | 0 VDC |
| 1794896095 | 243 Count | 586 Count | 202 Count | 4.12 VDC | 0 VDC |
| 1794895193 | 235 Count | 569 Count | 195 Count | 4.12 VDC | 0 VDC |
| 1794894292 | 216 Count | 546 Count | 177 Count | 4.12 VDC | 0 VDC |
| 1794893392 | 211 Count | 531 Count | 173 Count | 4.12 VDC | 0 VDC |
| 1794892491 | 206 Count | 511 Count | 169 Count | 4.12 VDC | 0 VDC |
| 1794891590 | 201 Count | 499 Count | 165 Count | 4.12 VDC | 0 VDC |
| 1794890689 | 195 Count | 486 Count | 160 Count | 4.12 VDC | 0 VDC |
| 1794889788 | 190 Count | 470 Count | 156 Count | 4.12 VDC | 0 VDC |
| 1794888888 | 183 Count | 451 Count | 150 Count | 4.12 VDC | 0 VDC |
| 1794887987 | 177 Count | 435 Count | 145 Count | 4.11 VDC | 0 VDC |
| 1794887086 | 171 Count | 419 Count | 140 Count | 4.12 VDC | 0 VDC |
| 1794886185 | 166 Count | 404 Count | 136 Count | 4.12 VDC | 0 VDC |
| 1794885284 | 160 Count | 390 Count | 131 Count | 4.12 VDC | 0 VDC |
| 1794884383 | 154 Count | 378 Count | 126 Count | 4.12 VDC | 0 VDC |
| 1794883483 | 147 Count | 364 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1794882582 | 141 Count | 344 Count | 115 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)