APRS Track Direct

My position About ☰

reset

IR3ZXS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3ZXS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790684363	13.95 Volt	240 Pkt	100 Pkt	35 Pcnt
1790683764	13.95 Volt	240 Pkt	90 Pkt	36 Pcnt
1790683763	13.95 Volt	240 Pkt	90 Pkt	36 Pcnt
1790683163	13.95 Volt	250 Pkt	80 Pkt	38 Pcnt
1790682563	13.95 Volt	230 Pkt	80 Pkt	39 Pcnt
1790681963	13.95 Volt	250 Pkt	80 Pkt	42 Pcnt
1790681363	13.95 Volt	270 Pkt	80 Pkt	44 Pcnt
1790680763	13.95 Volt	290 Pkt	100 Pkt	47 Pcnt
1790680163	13.95 Volt	340 Pkt	120 Pkt	50 Pcnt
1790679563	13.95 Volt	370 Pkt	150 Pkt	51 Pcnt
1790678963	13.95 Volt	400 Pkt	160 Pkt	54 Pcnt
1790678363	13.95 Volt	420 Pkt	170 Pkt	55 Pcnt
1790677763	13.95 Volt	440 Pkt	170 Pkt	56 Pcnt
1790677163	13.95 Volt	440 Pkt	180 Pkt	54 Pcnt
1790676563	13.95 Volt	430 Pkt	180 Pkt	55 Pcnt
1790675963	13.95 Volt	430 Pkt	170 Pkt	55 Pcnt
1790675363	14.03 Volt	420 Pkt	160 Pkt	53 Pcnt
1790674763	14.03 Volt	420 Pkt	160 Pkt	52 Pcnt
1790674163	14.03 Volt	450 Pkt	170 Pkt	52 Pcnt
1790673563	13.95 Volt	460 Pkt	170 Pkt	51 Pcnt
1790672963	14.03 Volt	470 Pkt	160 Pkt	48 Pcnt
1790672363	13.95 Volt	450 Pkt	170 Pkt	46 Pcnt
1790671763	14.03 Volt	450 Pkt	170 Pkt	45 Pcnt
1790671163	14.03 Volt	450 Pkt	170 Pkt	44 Pcnt
1790670563	14.03 Volt	420 Pkt	160 Pkt	41 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)