This is the latest recevied telemetry packets stored in our database for station/object ER-DO0KPB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749329206 | 0.02 | 0.05 | 3 | 3 | 0 |
| 1749328606 | 0 | 0.01 | 0 | 1 | 0 |
| 1749328006 | 0 | 0 | 0 | 0 | 0 |
| 1749327406 | 0 | 0 | 0 | 0 | 0 |
| 1749326806 | 0 | 0.05 | 2 | 3 | 0 |
| 1749325606 | 0 | 0.61 | 0 | 2 | 0 |
| 1749325006 | 0 | 0 | 0 | 0 | 0 |
| 1749324406 | 0 | 0.71 | 0 | 1 | 0 |
| 1749323806 | 0 | 0.01 | 0 | 1 | 0 |
| 1749323206 | 0 | 0 | 0 | 0 | 0 |
| 1749322606 | 0 | 0.73 | 0 | 7 | 0 |
| 1749322006 | 0 | 0.75 | 1 | 7 | 0 |
| 1749321406 | 0 | 0 | 0 | 0 | 0 |
| 1749320806 | 0 | 0.29 | 0 | 2 | 0 |
| 1749320206 | 0 | 0.58 | 0 | 2 | 0 |
| 1749319606 | 0 | 0.79 | 0 | 2 | 0 |
| 1749319006 | 0 | 0.63 | 0 | 1 | 0 |
| 1749318406 | 0 | 0.99 | 0 | 2 | 0 |
| 1749317806 | 0 | 0.45 | 0 | 1 | 0 |
| 1749317206 | 0 | 0.54 | 0 | 1 | 0 |
| 1749316606 | 0 | 0 | 0 | 0 | 0 |
| 1749316006 | 0 | 0.04 | 1 | 2 | 0 |
| 1749315406 | 0 | 0.02 | 2 | 2 | 0 |
| 1749314806 | 0 | 0 | 0 | 0 | 0 |
| 1749314206 | 0 | 0.04 | 0 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)