This is the latest recevied telemetry packets stored in our database for station/object DF6PC-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1749316979 | 995.6 hPa | 23.3 C deg | 50.5 % | 1015.6 hPa | 0 C deg |
| 1749315179 | 995.3 hPa | 24.4 C deg | 49.8 % | 1015.3 hPa | 0 C deg |
| 1749313379 | 995.4 hPa | 24.2 C deg | 50 % | 1015.4 hPa | 0 C deg |
| 1749311589 | 995.3 hPa | 23.5 C deg | 50.1 % | 1015.3 hPa | 0 C deg |
| 1749309783 | 995 hPa | 25.1 C deg | 49.4 % | 1014.9 hPa | 0 C deg |
| 1749307984 | 995.2 hPa | 24.6 C deg | 49.6 % | 1015.1 hPa | 0 C deg |
| 1749306178 | 995.1 hPa | 24.6 C deg | 49.7 % | 1015 hPa | 0 C deg |
| 1749304400 | 995 hPa | 24.9 C deg | 50 % | 1014.9 hPa | 0 C deg |
| 1749302587 | 994.8 hPa | 26 C deg | 49.4 % | 1014.6 hPa | 0 C deg |
| 1749300782 | 994.8 hPa | 26.3 C deg | 49.4 % | 1014.6 hPa | 0 C deg |
| 1749298977 | 994.9 hPa | 25.8 C deg | 49.3 % | 1014.7 hPa | 0 C deg |
| 1749297177 | 994.9 hPa | 25.2 C deg | 49.9 % | 1014.8 hPa | 0 C deg |
| 1749295377 | 995 hPa | 26.1 C deg | 49.7 % | 1014.8 hPa | 0 C deg |
| 1749293580 | 994.6 hPa | 27.5 C deg | 48.8 % | 1014.3 hPa | 0 C deg |
| 1749289976 | 994.4 hPa | 27.3 C deg | 49.8 % | 1014.1 hPa | 0 C deg |
| 1749288176 | 994.7 hPa | 24 C deg | 52.1 % | 1014.6 hPa | 0 C deg |
| 1749286378 | 995 hPa | 24.2 C deg | 52 % | 1015 hPa | 0 C deg |
| 1749284577 | 995.3 hPa | 23.4 C deg | 52.6 % | 1015.3 hPa | 0 C deg |
| 1749282776 | 995.4 hPa | 23.3 C deg | 52.7 % | 1015.4 hPa | 0 C deg |
| 1749279176 | 995.4 hPa | 22.5 C deg | 53.1 % | 1015.5 hPa | 0 C deg |
| 1749277378 | 995 hPa | 22.2 C deg | 53.4 % | 1015.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)