This is the latest recevied telemetry packets stored in our database for station/object DB8NR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732278277 | 21 deg C | 46.4 % | 1005.2 hPa | 0 | 0 |
| 1732277382 | 21.2 deg C | 46.2 % | 1005.4 hPa | 0 | 0 |
| 1732276481 | 21.4 deg C | 46.9 % | 1005.6 hPa | 0 | 0 |
| 1732274679 | 21.3 deg C | 46.9 % | 1005.6 hPa | 0 | 0 |
| 1732273781 | 21.3 deg C | 46.8 % | 1000.5 hPa | 0 | 0 |
| 1732272877 | 21.2 deg C | 47.1 % | 1004.4 hPa | 0 | 0 |
| 1732271980 | 20.9 deg C | 47.1 % | 1012.9 hPa | 0 | 0 |
| 1732271076 | 20.8 deg C | 48 % | 1001.6 hPa | 0 | 0 |
| 1732267469 | 19.8 deg C | 47.7 % | 1005 hPa | 0 | 0 |
| 1732266572 | 19.6 deg C | 49.1 % | 1004.4 hPa | 0 | 0 |
| 1732263313 | 17.5 deg C | 48.3 % | 1005.5 hPa | 0 | 0 |
| 1732256980 | 16.5 deg C | 51 % | 1004.6 hPa | 0 | 0 |
| 1732256078 | 16.5 deg C | 51.1 % | 1002.8 hPa | 0 | 0 |
| 1732249819 | 16.8 deg C | 50.8 % | 1002.5 hPa | 0 | 0 |
| 1732248919 | 16.8 deg C | 50.9 % | 1000 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)