This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745003462 | 64.04 | 2.05 | 62.33 | 0.33 | 74 |
| 1745002802 | 64.64 | 0.76 | 62.48 | 0.33 | 74 |
| 1745002502 | 64.28 | 2.21 | 62.17 | 0.31 | 74 |
| 1745001842 | 64.31 | 1.93 | 62.71 | 0.32 | 74 |
| 1745001182 | 64.98 | 1.73 | 63.03 | 0.34 | 74 |
| 1745000521 | 65.52 | 2.19 | 63.53 | 0.45 | 75 |
| 1744999861 | 65.48 | 2.55 | 63.45 | 0.59 | 75 |
| 1744999202 | 65.12 | 2.41 | 62.9 | 0.58 | 75 |
| 1744998902 | 65.18 | 2.51 | 62.9 | 0.58 | 75 |
| 1744998242 | 65.65 | 0.75 | 21.85 | 9.07 | 76 |
| 1744997581 | 64.18 | 8.53 | 14.56 | 5.95 | 77 |
| 1744996921 | 64.2 | 9.6 | 14.49 | 6.02 | 77 |
| 1744996262 | 49.95 | 12.31 | 14.52 | 5.69 | 77 |
| 1744995602 | 49.68 | 11.14 | 14.48 | 5.9 | 76 |
| 1744995303 | 49.68 | 11.36 | 14.5 | 5.76 | 76 |
| 1744994642 | 50.47 | 10.32 | 14.46 | 5.54 | 75 |
| 1744993983 | 62 | 11.35 | 14.41 | 5.21 | 75 |
| 1744993322 | 62.08 | 12.09 | 14.44 | 4.89 | 74 |
| 1744992662 | 60.93 | 10.63 | 14.47 | 4.44 | 72 |
| 1744992002 | 59.58 | 7.92 | 14.42 | 4.13 | 71 |
| 1744991701 | 32.34 | 5.92 | 14.39 | 4.01 | 71 |
| 1744991042 | 60.33 | 7.52 | 14.35 | 3.72 | 70 |
| 1744990382 | 55.17 | 10.98 | 14.33 | 3.31 | 69 |
| 1744989722 | 57.04 | 7.3 | 14.32 | 2.97 | 68 |
| 1744989062 | 60.97 | 7.31 | 14.31 | 2.66 | 67 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)