This is the latest recevied telemetry packets stored in our database for station/object W5CDN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794893617 | 458 | 588 | 0 | 0 | 0 |
| 1794893378 | 458 | 584 | 0 | 0 | 0 |
| 1794893258 | 460 | 581 | 0 | 0 | 0 |
| 1794893142 | 427 | 579 | 0 | 0 | 0 |
| 1794873511 | 459 | 606 | 0 | 0 | 0 |
| 1794873391 | 452 | 604 | 0 | 0 | 0 |
| 1794871216 | 457 | 617 | 0 | 0 | 0 |
| 1794870141 | 463 | 617 | 0 | 0 | 0 |
| 1794870022 | 463 | 617 | 0 | 0 | 0 |
| 1794869902 | 464 | 617 | 0 | 0 | 0 |
| 1794869783 | 462 | 616 | 0 | 0 | 0 |
| 1794869664 | 462 | 616 | 0 | 0 | 0 |
| 1794869544 | 461 | 616 | 0 | 0 | 0 |
| 1794869425 | 460 | 615 | 0 | 0 | 0 |
| 1794869305 | 459 | 615 | 0 | 0 | 0 |
| 1794869185 | 458 | 614 | 0 | 0 | 0 |
| 1794869066 | 457 | 614 | 0 | 0 | 0 |
| 1794868946 | 456 | 613 | 0 | 0 | 0 |
| 1794868828 | 455 | 612 | 0 | 0 | 0 |
| 1794868708 | 456 | 612 | 0 | 0 | 0 |
| 1794868588 | 458 | 609 | 0 | 0 | 0 |
| 1794868469 | 462 | 607 | 0 | 0 | 0 |
| 1794868350 | 455 | 604 | 0 | 0 | 0 |
| 1794868230 | 428 | 602 | 0 | 0 | 0 |
| 1794861920 | 461 | 611 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)