APRS Track Direct

My position About ☰

reset

TA1KNN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1KNN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1770391051	287 Pkt	23 Pkt	1 Pkt	-71 dBm	0.1 V
1770390124	262 Pkt	78 Pkt	74 Pkt	-72 dBm	0.1 V
1770389195	326 Pkt	27 Pkt	7 Pkt	-72 dBm	0.1 V
1770388266	296 Pkt	28 Pkt	8 Pkt	-73 dBm	0.1 V
1770387339	324 Pkt	36 Pkt	19 Pkt	-73 dBm	0.1 V
1770386411	258 Pkt	66 Pkt	85 Pkt	-73 dBm	0.1 V
1770385484	301 Pkt	26 Pkt	20 Pkt	-72 dBm	0.1 V
1770384555	325 Pkt	21 Pkt	10 Pkt	-72 dBm	0.1 V
1770383626	333 Pkt	25 Pkt	7 Pkt	-72 dBm	0.1 V
1770382697	310 Pkt	26 Pkt	5 Pkt	-71 dBm	0.1 V
1770381770	331 Pkt	23 Pkt	4 Pkt	-72 dBm	0.1 V
1770380842	336 Pkt	26 Pkt	13 Pkt	-72 dBm	0.1 V
1770379912	329 Pkt	21 Pkt	12 Pkt	-72 dBm	0.1 V
1770378986	311 Pkt	25 Pkt	12 Pkt	-71 dBm	0.1 V
1770378059	361 Pkt	27 Pkt	9 Pkt	-71 dBm	0.1 V
1770377129	348 Pkt	27 Pkt	10 Pkt	-71 dBm	0.1 V
1770376201	365 Pkt	20 Pkt	10 Pkt	-72 dBm	0.1 V
1770375272	332 Pkt	30 Pkt	15 Pkt	-72 dBm	0.1 V
1770374343	326 Pkt	19 Pkt	6 Pkt	-72 dBm	0.1 V
1770373414	320 Pkt	27 Pkt	6 Pkt	-72 dBm	0.1 V
1770372485	340 Pkt	27 Pkt	1 Pkt	-71 dBm	0.1 V
1770371556	322 Pkt	25 Pkt	0 Pkt	-72 dBm	0.1 V
1770370629	350 Pkt	24 Pkt	0 Pkt	-71 dBm	0.1 V
1770369699	381 Pkt	27 Pkt	1 Pkt	-72 dBm	0.1 V
1770368771	354 Pkt	27 Pkt	0 Pkt	-71 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)