APRS Track Direct

My position About ☰

reset

VK2OB-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2OB-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BoxTmp*	BoxHum*	dPres*	Counts*
1836274855	30.2 DegC	18 %.	0 mbar	112 CNT
1836274251	31.2 DegC	18 %.	0 mbar	111 CNT
1762319937	48 DegC	8 %.	0.2 mbar	180 CNT
1762319332	46.8 DegC	8 %.	0.9 mbar	179 CNT
1762318727	43.2 DegC	10 %.	0 mbar	178 CNT
1762318123	43 DegC	10 %.	1.1 mbar	177 CNT
1762317518	44.4 DegC	9 %.	1.2 mbar	176 CNT
1762316914	45.4 DegC	9 %.	0.9 mbar	175 CNT
1762316309	44.8 DegC	9 %.	0.1 mbar	174 CNT
1762315704	40.4 DegC	11 %.	0 mbar	173 CNT
1762315100	44 DegC	11 %.	0.3 mbar	172 CNT
1762314495	39.8 DegC	12 %.	0.4 mbar	171 CNT
1762313890	44.4 DegC	10 %.	0.9 mbar	170 CNT
1762313286	41.4 DegC	11 %.	0.6 mbar	169 CNT
1762312681	40.4 DegC	12 %.	1.7 mbar	168 CNT
1762312076	41.4 DegC	11 %.	0.6 mbar	167 CNT
1762311472	42.4 DegC	12 %.	0.3 mbar	166 CNT
1762310867	41.8 DegC	12 %.	0.8 mbar	165 CNT
1762310263	42.8 DegC	12 %.	2.3 mbar	164 CNT
1762309658	42.4 DegC	12 %.	1.3 mbar	163 CNT
1762309054	40.8 DegC	13 %.	0 mbar	162 CNT
1762308449	40.6 DegC	13 %.	0 mbar	161 CNT
1762307844	41.4 DegC	13 %.	3.2 mbar	160 CNT
1762307240	42.6 DegC	12 %.	0 mbar	159 CNT
1762306635	41.4 DegC	13 %.	0.9 mbar	158 CNT

*Used Equation Coefficients:

BoxTmp: 0, 0.2, 0

BoxHum: 0, 1, 0

dPres: 0, 0.1, 0

N/A: 0, 1, 0

Counts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)